Use code TWOPEAS to get $150 off a Gardyn and membership here.

22 Easy Sansevieria Sayuri Care Tips You Should Know

Sansevieria Sayuri is a tropical and easy-to-care-for plant that will elevate any garden in your home. Sayuri is well-loved by plant enthusiasts because of its appearance and feel.

We’re sharing the most important hacks you’ll need to know to successfully raise a Sansevieria Sayuri!

If you want to purchase one, we have a few reasonable options for you to explore. Continue reading to learn more about this Dracaena’s interesting attributes.

What Is Sansevieria Sayuri?

The Sansevieria Sayuri is widely known for its attractive foliage. It has lanceolate-shaped and light green to silvery gray-colored leaves.

This rather uncommon variety but no less beautiful Sansevieria is also called Sansevieria Metallica, Sansevieria Silver Siam, and Metallica Snake Plant. It is from the Asparagaceae family.

This Dracaena would survive outdoors in hardiness zones 9-11.

Origin And Family

The Sansevieria Metallica is a member of the Asparagaceae family. This variety of the genus Dracaena comes from the plains of Africa. Indoor plants thrive in most homes, even though in dry conditions.

Where To Buy

To find Sansevieria Sayuri for sale, try visiting garden centers nearby or purchase online for cheaper deals. Etsy is our go-to platform in buying houseplants! They have a wide selection of plants grown and sold by fellow hobbyists who are happy to answer your questions about plant care.

In terms of pricing, the Sansevieria Sayuri is very affordable on average, costing between $15 for rooted cuttings to $30 for larger or more mature plants.

Sansevieria Sayuri Plant Size

The Sansevieria Sayuri is a slow-growing houseplant when placed near an east or west-facing window. It can reach an average height of 2-3 feet in homes.

Sansevieria Sayuri Care Needs

Your Sansevieria Sayuri, with attractive foliage, will flourish if you take good care of it. This plant loves dry conditions and dry soil throughout the year.

Water your Dracaena water every ten days. Always allow the water to run down the bottom of the pot so you can do a full drench. If you are concerned about the lighting, we recommend bright indirect light.

Look at the more specific growing tips we’ve written below to keep your Sansevieria Sayuri healthy and happy!

Care Difficulty

The Sansevieria Silver Siam is considered by most indoor gardeners to be easy to care for. With the right combination of a good amount of light and well-draining soil, you can keep this plant in its best health.

Growth Rate

When grown indoors, the Metallica Snake Plant plant grows to 2-3 feet. It grows the fastest during the warmer months of spring and summer.

Most Dracaena species, including the Sayuri, have a slow-growing speed.

Potting

In terms of container pot size, it is normally acceptable to use a medium container. Most potting materials, including terracotta pots, will work perfectly.

Sansevieria Metallica is susceptible to root rot. Make sure there are drainage holes in its pot.

Repotting

To keep your plant healthy, it is good to transplant it to a bigger pot once it grows to a certain size. You see roots pushing out the drainage holes; you’ll know it’s time to repot.

On average, Sansevieria Sayuri grows slowly and needs to be repotted perhaps, once a year. This plant tends to lose its natural nutrient components over time, so it’s better to add some cacti and citrus potting soil when you’re repotting.

Soil

For the Sansevieria Silver Siam, cacti or succulent potting soil is a suitable choice. Add together components such as gravel, sand, pumice, and perlite to make your soil mix.

As one of the toughest plants, this beauty can grow in just about any soil type as long as drainage is adequate. Take note that this plant prefers a dry growing soil medium.

The rule of thumb in planting is to choose good drainage and aeration soil so healthy roots can breathe.

We recommend the following potting mixes:

Photo Title Price Buy
Miracle-Gro Indoor Potting...image Miracle-Gro Indoor Potting Mix, Grows beautiful Houseplants, 6 qt. (2 Pack) $13.42 ($0.03 / Ounce)
Burpee, 9 Quarts...image Burpee, 9 Quarts | Premium Organic Potting Natural Soil Mix Food Ideal for Container Garden-Vegetable, Flower & Herb Use for Indoor Outdoor Plant $12.99 ($0.04 / Ounce)
Sun Gro Horticulture...image Sun Gro Horticulture 8-Quart Black Gold 1310102 Purpose Potting Soil With Control, Brown/A $14.96 ($0.06 / Fl Oz)
Miracle-Gro Potting Mix,...image Miracle-Gro Potting Mix, Potting Soil for Outdoor and Indoor Plants, Enriched with Plant Food, 2 cu. ft. $34.65
FoxFarm Ocean Forest...image FoxFarm Ocean Forest Potting Soil Mix Indoor Outdoor for Garden and Plants | Plant Fertilizer | 12 Quarts | The Hydroponic City Stake $23.99 ($0.06 / Fl Oz)

pH

The pH level for this plant should be around 6.0-7.5, meaning your Metallica Snake Plant likes alkaline to neutral soil. If you’re repotting on schedule or adding new soil from time to time, pH level wouldn’t be as much of a concern if you’re growing this plant outdoors.

Water

The watering frequency will vary based on the temperature and the humidity in your plant’s surroundings. Generally speaking, your Sansevieria Metallica prefers a dry growing medium.

Sansevieria plants are extremely drought-tolerant plants. As a result, they may go for days without drinking. However, they would prefer to go a few days without water than be given too much.

Instead of the stick method, follow the deeply and thoroughly method of watering. Remember to dry out before watering again. We recommend watering every ten days and pouring directly on the soil and taking caution not to wet the foliage to avoid fungal diseases.

Allow the excess water to flow through the bottom of the pot. Always remember to empty the collection tray if your plant is sitting in one to avoid root rot.

During the winter months, reduce or stop watering your plants. This is when the plant enters its dormant state. Only water your plant once a month during this period.

Light

Coming from the plains of Africa, this plant is used to receive bright indirect light. In an indoor setting, 6-8 are the recommended hours of exposure for your Sansevieria Sayuri.

Known as one of the toughest plants, the Sayuri can withstand various lighting conditions where other plants can’t survive – from complete shade to bright full sun. However, for optimal development, position your plant in a location that receives moderate to bright sunshine. Your plant may be harmed by too much direct sunlight.

If the light is too bright for your plant’s liking, its leaves may get scorched or turn yellow. When this happens, move your plant away from the window, or use curtains and blinds to filter the light coming in.

On the other hand, if your Sayuri is not getting as much light as it needs, its leaves may droop. In this case, you can move your plant closer to a window. You can also supplement it with grow lights. We recommend the following artificial lighting products:

Fertilizer

All living things like humans and plants need more food when they are actively growing because they need to use a lot of energy. For the Sansevieria Silver Siam, this growth spurt usually happens in spring and summer. During this time, you can apply a general-purpose fertilizer once a month.

In the winter season, you don’t need to fertilize because plants’ roots usually go dormant in the cold. Because of this, they don’t need any extra food to help it grow.

Propagating Sansevieria Sayuri

If your Siam Silver has thrived well, you may prune back the stem and set the cuttings aside to propagate a new plant! Below, we’ve listed step-by-step guides for different growing methods.

Division

Division is one of the most viable methods typically used for plants that have pups shooting out from the roots.

You can divide the stem clusters of your Metallica Snake Plant by following these steps:

1. Dig up. Take the plant out of its container. You should be able to see where the plant’s natural divisions are.

2. Separate. With your fingers, gently separate the sections apart. You may need to use shears to cut any entangled roots.

3. Repot. Plant each section in new pots filled with the same soil they’re used to.

Humidity And Aeration

Sansevieria Sayuri is a charming perennial that loves moderate humidity, making it a perfect houseplant. Usually, 40%-50% is the best and recommended air humidity level.

The moisture in the air also affects the nourishment of your plant, aside from the roots. Tips from plant enthusiasts are to keep bowls of water to evaporate nearby. You can also invest in a humidifier that is more consistent in improving humidity for your plant.

Temperature

Like most Dracaena plants, your Metallica Snake Plant will do best in a cool-to-temperate location. So keep the temperature between 60-85 degrees Fahrenheit.

Houseplants can be sensitive to drastic shifts in temperature, so make sure you keep your Metallica Snake Plant away from heat sources such as vents, hand dryers, furnaces, and other appliances. In the same way, don’t expose your plant to cold drafts and frost spells during the winter.

Flowers

Most plants will typically bloom only when exposed to the natural elements. Nonetheless, your Sansevieria Metallica can still produce insignificant pale green or greenish-white vertical flowers spikes most summers.

These spikes have a lot of little buds on them, and they bloom in clusters on the upper part of the spike. They also have a sweet scent.

Toxic

If you have tiny children and pets at home, handle this plant responsibly. The Sansevieria Silver Siam is toxic to animals, including humans, cats, and dogs. If ingested, you will feel the following symptoms: nausea, vomiting, diarrhea, and other gastrointestinal issues. In general, this sansevieria is non-life-threatening.

Toxic To Pets? Care Specifics
Botanical Name Sansevieria Sayuri
Common Name Sansevieria Metallica, Sansevieria Silver Siam, Metallica Snake Plant
Plant Family Asparagaceae
Origin Africa
Plant Type perennial
Leaf Shape lanceolate
Leaf Color lightgreen to silvery gray
Recommended Home Placement near an east or west-facing window
Growth Rate slow
Light bright indirect light
Soil cacti and citrus potting soil
When To Water Water water every 10 days.
When To Fertilize once a month during growing season
Preferred pH 6.0-7.5
Humidity Range 40%-50%
Toxic To Pets? Yes – symptoms include nausea, vomiting, diarrhea, and other gastrointestinal issues
Common Pests & Diseases spider mites, brown tips, yellow leabes, root rot, mealy bugs, drooping leaves

Pests, Diseases, And Other Problems

Is your Sansevieria Sayuri looking ill? Most would say that this is a plant with strong resistance to pests, diseases, and overall problems.

I’ve provided the common issues that affect this charming plant in the following sections. Use these tips to help diagnose and treat your Dracaena.

Spider Mites

Unfortunately, spider mites are widespread, particularly for plant collectors with a Metallica Snake Plant. You will notice that your plant is suffering from spider mites problem if they have silky webbing between branches, have brown or yellow patches on its leaves, and leaves that take a long time to unfurl.

If you want to cure this spider mite infestation, bring your plant to the sink or tub and wash the infested leaves thoroughly with water. You can also apply horticultural oil, insecticidal soap, or neem oil.

Ladybugs, lacewings, and minute pirate bugs can help control your spider mite population if you want a non-chemical approach.

Mealybugs

Mealybugs have the potential to infest your Metallica Snake Plant. These parasites cause damage by sipping on your plant’s nutrients. Worst case, mealybugs have the potential to kill your Metallica Snake Plant.

Rubbing alcohol is your number one weapon against mealybugs. It will kill mealybugs on contact and turn them into a translucent brown color. Then, dilute the alcohol in water and spray directly on the pesky critters.

Brown Leaf Tips

Suppose you notice browning tips on the leaves of your Sansevieria Metallica. In that case, you might need to double-check a number of factors.

Make sure the humidity in your home is not too low. Filter the sunlight with curtains if it’s shining too harshly on your plant. Don’t apply too much fertilizer. Let the excess water flow through the soil for several minutes to flush out excess minerals and salts.

Drooping Leaves

Mealybugs and other pests that infest the Sansevieria Sayuri can cause leaves to droop. This problem can also be caused by underwatering, lack of humidity, and nutrients.

Yellow Leaves

If you notice that the leaves of your Sansevieria Silver Siam are turning yellow, you will need to trace any recent adjustments in your usual care practices or the weather.

Overwatering, underwatering, overfertilizing, under fertilizing, too much light, lack of light, root damage, temperature swings, and pests can cause yellowing leaves.

Root Rot

Root rot is a common killer of Metallica Snake Plant. The rotting starts at the roots and quickly spreads to the stem and foliage. Remember, you should only water every 10 days.

Did you know that poor drainage system is one of the leading causes of root rot? This tropical plant requires cacti and citrus potting soil that stays dry.

Other things you can do to avoid root rot include:

  • Drilling holes at the bottom of your pot.
  • Choosing high-porosity materials such as terracotta and unglazed ceramic planters.
  • Lengthening the gap between watering schedules.

Similar Plants

Love Sansevieria Metallica and low-maintenance plants? Here are some other similar tropical plants you should try:

Sansevieria Zeylanica: – is a tough and robust plant that can survive a lot of neglect. Many people adore this plant since it is so simple to care for that you can plant it then forget about it, and it will still survive.

Sansevieria Whale Fin: – As the name suggests, this plant’s leaves are paddle-shaped and resemble a whale’s fin. On the other hand, its unusual look is adorable, and it’s something you’ll want to show off when you’re displaying your plant collection.

Sansevieria Fernwood: – One of the genus’s most adaptable plants. It can thrive in low-light conditions where most other plants can’t, making it one of the toughest plants to kill.

Conclusion

With its attractive characteristics, Sansevieria Sayuri is a fantastic choice if you’re looking for a new houseplant. All your plant care will be worth it with beautiful exotic flora that you will enjoy having in your home!

Can’t get enough plant guides? Check out these other options below.

Help us grow! This blog contains affiliate partners, which means we receive a commission if you click a link and buy what we recommend. However, all opinions are our own, and we do not accept payments for positive reviews.

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to our Pea Pod!

Receive top indoor gardening and hydroponics tips directly to your inbox.

    © 2023 Copyright Two Peas In A Condo